Products from the R. C. Davis Company, Inc.
Our True-Bond™ line of epoxies is formulated for heavy duty industrial repairs and resurfacing and are designed to withstand abuse from forklifts, tow motors, heavy weights, and even steel wheels! From areas that are constantly wet and unable to be dried for repairs, to freezing temperatures as low as 40 below zero, True-Bond™ brand epoxies meet every challenge head on. True-Bond™ products have a compressive strength of over 12000psi which makes our material four times stronger than concrete! With 10-35% elasticity, True-Bond™ epoxies are capable of expanding and contracting with the concrete as the temperature changes, making our products perfect for making repairs in and around expansion joints. Our materials can be applied as thick or as thin as needed, to include feather edging. True-Bond™ epoxies bond with the repair surface on a molecular level so that a permanent repair is achieved.
In normal temperatures, True-Bond™ epoxies are hard enough for a man to walk on and work on in about an hour. Within 8 hours your newly repaired area is ready for full traffic including loaded forklifts!
True-Bond™ compounds are sold by the "kit" which covers approximately 200 square feet at a thickness of ¼ inch. Each kit comes with Part A (resin), Part B (hardener) and a container of our Super Aqua Solv cleaner/degreaser for preparatory cleaning. The only thing you add is the aggregate (sand).
 |
True-Bond™ View Label | ||
The original product of our line, Regular True-Bond™ is formulated for dry surface application in normal temperatures. Use it to address any concrete or other hard surface repair. It even bonds to wood and steel! Low temperature cure (as low as 40°F). Included in the kit:
|
| True-Bond PS™ (Poly-Sulfide) View Label | |
||
Bonds and cures on damp surfaces! A MUST for oily conditions!
This material is formulated for wet surface application, which has made it a big hit in food processing plants in the U.S. for years. This product is also perfect for making repairs to surfaces that have been saturated with oils or fats where most materials won't adhere. With proper cleaning using our Super Aqua Solv and following simple yet specific instructions, even these areas can be completely repaired using True-Bond PS™. Quickest cure is at 70°F or higher, but can be used at lower temperatures. Included in the kit:
|
 |
True-Bond Kote™ (Heavy Duty Coating
and Slip-Proofing) |
||
This product is utilized for heavy impact, chemically resistant, industrial and commercial flooring. Resists chipping, corrosives, weather, bacteria, and impact. True-Bond Kote™ is also an excellent waterproofing material. Included in the kit:
|
| True-Bond LT™ (Low Temperature) View Label |
|
||
This material is formulated for cold temperature applications as low as 0°F.
Widely used by food plants for repairing freezer floors while the freezer remains
operational. Also great for those outdoor repairs that just can't wait until
spring. Low temperature cure as low as Included in the kit:
|
 |
True-Bond CR™ (Chemical Resistant) View Label | ||
Harsh chemicals can be your floor's worst enemy. True-Bond CR™ is formulated to resist chemicals, including acids and caustics. Commonly used for coating chemical containment areas and repairing drain openings, this material stands up to your very worst! Included in the kit:
|
| True-Bond CT™ (Coal Tar) View Label |
|
||
Problems with your expansion joints or asphalt surfaces? True-Bond CT™ is the answer. From hairline cracks to crater-like potholes this product comes through every time. With up to 35% elasticity it is extremely flexible to temperature changes, yet incredibly hard and durable. Serves as an excellent waterproofing membrane for bridges and concrete overlays. Perfect for expansion joints, roof repairs and bridge footings, True-Bond CT™ boasts a minimum tensile elongation of 35%. Included in the kit:
|
 |
True-Bond Gel™ (Thixotropic Epoxy Gel) View Label |
||
Formulated for vertical and overhead applications, True-Bond Gel™ is perfect for repairing cracked walls and even ceilings without the need for forms. Holds up to the same durability standards as all True-Bond™ materials. Included in the kit:
|
| Sure-Foot™ (O.S.H.A. Compliant Non-skid safety
surface) View Label |
|
||
Included in the kit:
|
 |
Super Aqua-Solv™ View Label | |
Sold in the following sized units:
|
